Anchoring brackets for LV service lines
This anchor bracket is developed to be used on wooden, metal or concrete poles or façadewalls to anchor the clamp with cable.
Applied on cables with one service clamp, on dead end route, end user electrical connections, up to 1 KV.
This anchor bracket is made of high strength aluminum alloy, attached to poles by one stainless steel band (20 mm) or a bolt 14,
16 mm diameter or 4 screws.
Fastening:
• On poles: with abolt Ø 14 or Ø 16 mm or with a stainless-steel strap 20 x 0,7 mm.
• Wall-mounted: with wood screws Ø 4x50 mm+T8 plugsor with TB 10 lag screw+T5 plug.
Technical specification:
•EN 50483-3
• NF C 33-040
Designation | Material | Tensile Strength (daN) |
CB 16 | Stainless steel | 200 daN |
CB 16 G | Galvanized Steel |
Applications:
