Dead-end clamps for distribution lines with neutral messenger
The anchor clamp is an “all-in-one” ready-to-use device. Easy and quick to install, it is the most commonly used
anchoring system and the most suitable for low voltage connection and distribution networks over spans of up to 90m.
Composition:
• Aluminium alloy body with high mechanical resistance.
• 2 thermoplastic wedges resistant to ultraviolet radiations.
• A flexible stainless steel bail.
Advantages:
• All the componentsare captive and resistant to corrosion in industrial and salt air environments.
Technical specification
• EN 50483-3
• NF C 33-041
Designation | Application | Neutral messenger (mm2) | Breaking load (daN) | a (mm) | b (mm) | c (mm) |
PA 600 | Wall-mounted | 54,6-70 | 600 | 140 | 100 | 240 |
PA 1000 | Pole-mounted | 29,5 | 1000 | 180 | 200 | 380 |
PA 1500 | Pole-mounted | 54,6-70 | 1500 | 180 | 200 | 380 |
PA 1500P | Pole-mounted | 54,6-70 | 1500 | 180 | 200 | 380 |
PA 2000 | Pole-mounted | 54,6-70 | 2000 | 160 | 210 | 370 |
PAR 95-2000 | Pole-mounted | 80-95 | 2000 | 160 | 210 | 370 |
